10Gb SR SFP+ Transceiver SFP-10G-SR

$75.00

Finisar's 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber.

SKU: SFP-10G-SR Category:

Description

Product Features


Finisar's 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3ae, 10GBASE-SR/SW, and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8571D3BCL is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038.

  • Hot-pluggable SFP+ footprint
  • Supports 9.95 to 10.5 Gb/s bit rates
  • Power dissipation < 1W
  • RoHS-6 compliant (lead-free)
  • Commercial temperature range 0°C to 70°C
  • Single 3.3V power supply
  • Maximum link length of 300m on 2000 MHz-km MMF
  • Uncooled 850nm VCSEL laser
  • Receiver limiting electrical interface
  • Duplex LC connector
  • Built-in digital diagnostic functions

Technical Specifications

 
Form Factor
SFP+
Distance 300 m
Protocol 10 Gb/s Fibre Channel Compliant
10 Gigabit Ethernet Compliant
Data Rate (max) 10.5 Gb/s
Low End Case Temperature 0°C
High End Case Temperature
70°C
Diagnostics Digital
Transmitter VCSEL
Receiver PIN
Voltage Supply 3.3
Connector LC